Melbourne, Florida
Chimney Stucco Repair in Melbourne, FL
Cracking, staining, and failed stucco on a chimney chase. We repair the stucco — and we will tell you when what you are looking at is not a stucco problem.
- ✓Cracks, patches & delamination
- ✓Texture matched to the existing wall
- ✓Stucco work only — no roofing or masonry
Serving Melbourne, Palm Bay, West Melbourne, Melbourne Beach, Palm Shores, Titusville.
Tell us about the chimney
What you are seeing on it, and how long it has looked that way.
Thanks — we have your details.
Your enquiry has been sent. We will follow up by email or phone.
A chimney is where several trades meet, and only one of them is ours.
More trades touch a chimney than touch any other part of the outside of a house. There is the stucco finish on the chase, the flashing where it passes through the roof, the masonry, and everything at the top. When something goes wrong up there, the visible symptom rarely announces which of those it belongs to.
We do the stucco. That is the whole of what we take on, and it is worth saying plainly, because the failure mode on a chimney is hiring the wrong trade — having the stucco made to look right while the actual problem stays where it is and comes back through the new finish.
So the first useful question is not what the repair costs. It is whether this is a stucco job at all.
If it is, we will do it. If it is not, we will say so, and you will not have paid us to find that out.
Stucco repair on chimney chases
Residential chimneys across Melbourne and Brevard County.
Cracking on a chimney chase
Cracks in the stucco finish on a chimney, including the corners and the vertical lines where a chase meets the main wall. What the cracking means depends on its width, direction, and pattern — the same way it does anywhere else on the house.
How to read a crackStaining and discolouration
Streaking or dark patches running down a chimney chase. Staining that persists well after rain means water is involved somewhere, and on a chimney that is worth establishing before the surface is made to look better.
Hollow, soft, or delaminated areas
Where stucco has let go of what it was bonded to, or gives when pressed, the affected area has to come off rather than be covered. Patching over delamination puts a new surface on the same failure.
Failed previous patches
Chimneys collect repairs — a chase is small, visible, and easy to spot-patch. Where an earlier patch has cracked out, shrunk, or no longer matches, the repair generally means taking back to sound material rather than adding another layer.
Texture and finish matching
A chimney chase is a small area on a large wall, which makes a mismatched patch obvious. Matching the existing texture across the repair is most of what separates a fixed chimney from a visibly repaired one.
Full re-stucco of a chase
Where the finish across a chase has reached the end of its life or has been patched repeatedly, re-stuccoing the whole chase is often the more honest answer than another partial repair.
Stucco repair & replacementThe parts of a chimney that belong to someone else.
Most pages leave this out. It is more useful to you than another list of services, because if what you need is on the right-hand side, calling a stucco company first only costs you time.
We do this
- The stucco finish on the chimney chase
- Cracked, hollow, soft, or delaminated stucco
- Failed or mismatched previous stucco patches
- Texture matching across a repair
- Re-stuccoing a full chase
We do not do this
- Chimney flashing and roofing work
- Masonry, brickwork, and chimney rebuilding
- Crowns, caps, and anything at the top
- Flues, liners, and anything inside
- Chimney sweeping
If your chimney needs both, the sequence usually matters — putting new stucco on before the reason it failed has been dealt with is how the same repair gets paid for twice.
Why the stucco up there ages faster than the stucco below it.
A chimney chase stands above the roofline as a narrow structure exposed on every side. It takes sun, wind, and driven rain from directions the walls below it are partly sheltered from, and in coastal Brevard it takes salt air along with them. Exposed elements weather faster everywhere, and here they do it noticeably faster.
It is also a small surface high on the house, which is why chimneys accumulate spot patches. Each one is a small job at the time. Several of them over the years is usually how a chase ends up needing to be taken back and redone properly rather than patched again.
None of that tells you whether the cracking on your chimney matters. That still comes down to width, direction, and pattern — and whether anything is staining.
Chimney stucco repair across Brevard County
We work throughout Brevard County, Florida.
- Melbourne
- Palm Bay
- West Melbourne
- Melbourne Beach
- Palm Shores
- Titusville
Chimney stucco repair questions
How much does chimney stucco repair cost in Melbourne, FL?
It depends on how much of the chase is affected, how much of the existing finish has to come off before anything goes back on, whether the texture has to be matched to the surrounding wall, and how the chimney is reached. We do not publish a Brevard County price range because we do not have a verified local one, and a number invented for a website is worse than no number. Given a look at the chimney and what it is doing, we can price the actual job.
My chimney is leaking. Can you fix that?
Not on its own. We repair stucco. A leak at a chimney can involve the flashing where the chimney meets the roof, the crown or cap on top, the masonry itself, or the stucco — and several of those are roofing and masonry work rather than stucco work. If the stucco is part of it, that part is ours. If it turns out the water is getting in somewhere we do not work, we will tell you that rather than repair the stucco and leave you with the same leak.
Do you do chimney flashing or roofing work?
No. Flashing and roofing are a different trade and we do not take that work on. It matters here because the roof-to-wall junction around a chimney is exactly the kind of joint where water gets into a wall, so it is worth knowing whether that is what you are dealing with before stucco work is scheduled.
Why does the stucco on my chimney crack when the rest of the house is fine?
A chimney chase is a narrow structure standing up above the roofline, so it is exposed on all sides and takes more sun, wind, and driven rain than the walls below it. That is the general reason exposed elements weather faster in Florida. Whether the cracking on yours is cosmetic or means something more depends on its width, direction, and pattern, the same as anywhere else on the house.
Should I repair the stucco or is there water behind it?
Worth settling first, because it changes the job. Dark patches that stay dark more than two days after rain, a hollow sound in one area, stucco that gives when you press it, or bubbling paint in a defined patch all point to water rather than a surface problem. One of those alone is weak evidence. Three in the same area is not.
Can you match the existing texture on my chimney?
That is the constraint on most chimney repairs, and it is worth asking any contractor about before work starts. On a small, visible, elevated surface, a patch that does not match reads as a repair from the street. Whether an exact match is achievable depends on the existing texture and how weathered the surrounding finish is — on a badly faded chase, coating the whole chase after the repair is sometimes the better-looking answer.
Tell us what the chimney is doing.
What you can see on it, roughly how long it has looked that way, and whether anything stains or darkens after rain. A photo from the ground is usually enough for us to tell you whether this is stucco work or whether you want a different trade first.
If it is the second one, we will point you at what you actually need.
Stucco repair · Melbourne and Brevard County
Describe the chimney
What you see, how long it has been there, and whether it stains.
Thanks — we have your details.
Your enquiry has been sent. We will follow up by email or phone.